Electrical Meter Box Removal may contain asbestos. If they were constructed or imported before 1 January 2004 they may contain asbestos containing materials (ACM). You can work on these, but you need to be:
- aware of the risks
- have completed a risk assessment of your work
- have implemented a risk management strategy
- follow all asbestos work and removal safe work procedures
Non-friable asbestos-containing materials (ACM) were commonly used as electrical meter boards in general, and as bases to the busbars, spark arresters, and flash guards. Timber meter boxes installed before 1990 can also be lined with asbestos-cement sheeting (fibro). Asbestos dust and debris may then be present within the cabinets.
Older electrical switchboard panels and meter panels were manufactured from asbestos/resin or asbestos coal tar pitch composite. These asbestos products had brand names such as Zelemite, Lebah, Asbestos, and Microlite. These usually have a smooth finish on the surfaces which are dark brown to black and also have a strong tar or bituminous smell to them.
Unsealed holes on these materials can reveal the presence of whitish asbestos fibers protruding from the material. Sometimes the brand names were stamped onto the rear of the boards and panels. The absence of such labels does not mean asbestos is not present.
It is not possible to tell if something has asbestos in the matrix just by looking at it (unless it is labeled or the brand names are in place). It is best to get materials tested or assume that asbestos is present and take suitable precautions and follow safe work procedures.
